Exterior de Industrias Relente

Technical article

Technical reading from Industrias Relente about precast moulds, pipe jacking, drilling and industrial manufacturing.

DateRelente blog

The Construction Products Regulation 2024/3110 replaces Regulation (EU) 305/2011 and changes what goes with every precast pipe or box culvert: a declaration of performance and conformity, the CE marking of the unit and, once it is activated for its product family, a digital product passport. The mould does not carry that CE marking: it stays in the precast plant and is never built into the works.

In short

  • Regulation (EU) 2024/3110 was published in the Official Journal of the EU on 18 December 2024 and repeals Regulation (EU) 305/2011.
  • It applies gradually, family by family, as the harmonised technical specifications for each product are published.
  • The declaration is made by the manufacturer of the precast unit: its performance and its conformity with the product requirements, in a single declaration.
  • The digital product passport is provided for in the regulation and will become mandatory through the acts adopted by the European Commission.
  • The mould is production equipment, not a construction product: it does not carry the CE marking under this regulation.

What is the Construction Products Regulation 2024/3110?

It is the European regulation that sets out how construction products are placed on the market in the European Union. It was published in the Official Journal of the EU on 18 December 2024 and replaces Regulation (EU) 305/2011, which until now governed the declaration of performance and the CE marking of pipes, box culverts, manholes and other precast units. The full text is available on EUR-Lex, where you can switch to any official EU language.

What matters for a precast plant is the pace: the change does not happen overnight. The regulation includes transitional provisions, and each product family moves to the new regime as its harmonised technical specifications are published. In the meantime, it is worth reading those provisions and checking where the product standard you already work with stands.

What changes for a concrete pipe or box culvert?

Above all, what changes is what the manufacturer of the unit has to declare and how that information is made available.

From a declaration of performance to a declaration of performance and conformity

Under the previous regulation, the manufacturer issued a declaration of performance covering the essential characteristics of its product. Under 2024/3110, that document becomes a declaration of performance and conformity: in addition to the performance of the unit, the manufacturer declares that it meets the applicable product requirements. By issuing it, the manufacturer takes responsibility for what it declares.

The digital product passport

The regulation sets up a digital passport system for construction products: information on the unit, accessible in digital format and linked to the product. It will not be required for every family at once: the European Commission will specify it through its acts. For a pipe or a box culvert, the date will depend on those acts and on its technical specification, so the sensible approach is to follow their publication rather than assume a date.

Environmental information

The regulation brings environmental sustainability into the information that will gradually be declared for construction products, according to what the technical specification of each family lays down. For the plant, this means that its production records will carry more weight: what is not measured cannot be declared.

Why does the mould not carry the construction product CE marking?

Because the regulation applies to construction products, meaning those manufactured to be incorporated permanently into construction works. The jacking pipe, the box culvert or the manhole ends up in the works; the mould does not: it stays in the plant, produces units and is closed again for the next cycle.

This leads to a simple rule: the CE marking and the declaration of performance and conformity belong to the concrete unit, and they are issued by whoever manufactures it. A steel mould has no construction product CE marking and cannot be “certified” as if it were a pipe or a box culvert.

A common case: a box culvert plant is preparing a new size, orders the mould and, while reviewing the documentation of its quality system, asks whether the mould should arrive with its own construction product CE marking and declaration. The answer is no. What it does need is a mould that reproduces the drawing geometry cycle after cycle, because the unit that comes out of it is the one the plant will declare.

What role does the mould play in what the plant declares?

The mould declares nothing, but it shapes what the plant can declare. The dimensions, tolerances and consistency of the units depend on it: if the mould deforms under vibration or closes less accurately with use, the units drift out of specification and factory production control picks it up too late.

That is why, when we design a mould, the first thing we look at is the final unit and its requirements: actual dimensions, intended use, demoulding and handling. This is what we explain on our pages for pipe jacking moulds and concrete box culvert and pipe moulds, which we design to drawing or technical sample. If you want to go deeper into geometry, our article on dimensional tolerances in jacking pipes explains what is checked and why.

What should the plant review ahead of the change?

  1. Identify the family of each unit and check whether it already has a harmonised technical specification under the new regulation or is still in transition.
  2. Read the transitional provisions of the regulation on EUR-Lex, together with whoever manages your quality system or certification.
  3. Review what production data you keep: the new declaration and, later on, the digital passport require traceable information on each unit.
  4. Check the condition of the moulds that produce the units you declare: geometry, closures and supports. A mould that no longer reproduces the drawing is a risk for what the plant signs.
  5. If you are going to produce a new size, prepare drawings, tolerances and operating conditions before ordering the mould. We explain this in what data to provide for a pipe jacking mould quotation.

A mistake we often see is waiting until the standard for the family is published before looking at the moulds. The regulation changes the paperwork for the unit, but the unit still comes out of the same mould: if the mould no longer delivers the geometry, the new declaration will not fix it.

New moulds for the units you are going to declare

The Construction Products Regulation 2024/3110 puts the focus on the unit and on whoever manufactures it. Our work comes one step earlier: building the custom mould that produces that unit to the drawing geometry. You can see all our lines in industrial products and, if you are preparing a new size or renewing your pipe or box culvert moulds, contact us with your drawings, dimensions and operating conditions.

Frequently asked questions

Does Regulation (EU) 2024/3110 already apply to concrete pipes and box culverts?

It applies gradually, family by family. Each family moves to the new regime as its harmonised technical specifications are published; until then, the transitional provisions of the regulation itself apply.

Does a precast concrete mould need construction product CE marking?

No. The regulation applies to products incorporated permanently into the works, and the mould is plant equipment. The construction product CE marking is carried by the concrete unit and issued by its manufacturer.

What is the declaration of performance and conformity?

It is the document in which the manufacturer of the unit declares its performance and that it meets the applicable product requirements. It replaces the declaration of performance under the previous regulation.

When will the digital product passport become mandatory?

The regulation provides for it, but when it becomes mandatory depends on the acts the European Commission adopts for each family. Until they are published, no specific date can be given for pipes or box culverts.

Keep reading

More technical criteria, organised by line of work.

The blog categories help you continue by affinity: precast moulds, pipe jacking and deep drilling tools.

Industrial blog